Paver Calculator
Estimate pavers, packs, layout rows and columns, base, and bedding sand.
What this calculator does
Both rectangular orientations are counted; the lower whole-position count is used.
Pavers and base
Both paver orientations are tested. Base and bedding volumes are calculated as separate compacted layers.
Your plan updates instantly
Drag with a mouse or finger. Pinch or scroll to zoom.
Both paver orientations are counted; the lower whole-position layout is used.
The arithmetic uses the exact values shown above. Verify field measurements, product pack sizes, layout constraints, and local requirements before ordering or building.
How to interpret the result
Both rectangular orientations are counted; the lower whole-position count is used.
How the result is calculated
Pavers = min(layout A, layout B) x (1 + waste %).
Worked example
An 18 x 12 ft patio using 8 x 4 in pavers is tested in both orientations.
Practical guidance
- Measure the project at least twice before ordering.
- Use actual product dimensions and package coverage.
- Keep a saved or printed copy of the inputs used for the estimate.
Assumptions and limitations
Curves, borders, patterns, drainage, excavation swell, and product requirements are separate.
Methodology
Calculations use standard geometry and normalized units. Countable products are rounded up where partial products cannot normally be purchased.
Read the complete calculation methodology and testing policy.
Frequently asked questions
Are results rounded for purchasing?
Countable materials and packages are rounded up. Measured area, length, volume, and cost remain decimal values where appropriate.
Is this a final construction specification?
No. It is a transparent planning estimate. Verify product instructions, site conditions, plans, and local requirements.