Brick Calculator
Estimate bricks, courses, positions per course, pallets, and planning mortar.
What this calculator does
Whole module positions are counted before waste.
Brick wall materials
Brick face dimensions plus one mortar joint form the repeating wall module.
Your plan updates instantly
Drag with a mouse or finger. Pinch or scroll to zoom.
Whole wall-module positions are counted before waste and packaging.
The arithmetic uses the exact values shown above. Verify field measurements, product pack sizes, layout constraints, and local requirements before ordering or building.
How to interpret the result
Whole module positions are counted before waste.
How the result is calculated
Bricks = rows x columns x (1 + waste %).
Worked example
A 20 x 8 ft modular-brick wall is counted by complete courses and positions.
Practical guidance
- Measure the project at least twice before ordering.
- Use actual product dimensions and package coverage.
- Keep a saved or printed copy of the inputs used for the estimate.
Assumptions and limitations
Openings, bonds, corners, returns, piers, cuts, reinforcement, and wall thickness are separate.
Methodology
Calculations use standard geometry and normalized units. Countable products are rounded up where partial products cannot normally be purchased.
Read the complete calculation methodology and testing policy.
Frequently asked questions
Are results rounded for purchasing?
Countable materials and packages are rounded up. Measured area, length, volume, and cost remain decimal values where appropriate.
Is this a final construction specification?
No. It is a transparent planning estimate. Verify product instructions, site conditions, plans, and local requirements.